sliding contact
英 [ˈslaɪdɪŋ ˈkɒntækt]
美 [ˈslaɪdɪŋ ˈkɑːntækt]
滑动接触（接点）
双语例句
- Utilizing molecular dynamics and finite element coupling method, a two dimensional adhesive sliding contact problem between a rigid cylinder and textured surface is investigated.
采用分子动力学与有限元耦合的多尺度方法，求解二维刚性圆柱表面压头与弹性纹理表面的纳观粘着滑动接触问题。 - For sliding contact, the coefficient of kinetic friction Uk is defined as the ratio of the frictional force to the normal force.
滑动接触时，动摩擦系数Uk的定义是摩擦力与法向力的比率。 - Steel body sliding contact line is a kind of lifting accessories.
钢体滑触线是起重配件的一种。 - The conductive metal strip used as a conductive contact surface is always kept full sliding contact with the electric brush, so that the utility model has favorable power supply effect.
由于用作导电接触面的导电金属条与电刷始终能保持全面滑动接触，所以供电效果好。 - And the extension units at both ends of the sliding contact surface Guide to seal well, absolutely rigid Coarse prevent the entry of foreign matter sliding surface damage Guide.
大拖板与滑动导轨接触的两端面要密封好，绝对防止硬质颗粒状的异物进入滑动面损伤导轨。 - At higher temperatures the load carrying capacity is reduced, depending on the material and sliding contact surface combination.
在温度较高的情况下，负荷能力会降低，降低幅度视材料和滑动接触面组合而定。 - The utility model discloses a sliding contact wire which is a sliding contact power supply circuit for mobile electric appliance device, such as lifting devices, transporting devices, etc.
本实用新型滑触线是一种起重运输等移动电气设备用的滑动接触供电线路。 - Influence of DC Machine Commutation on Stability of Electric-Brush Sliding Contact
电刷滑动接触的稳定性对换向的影响 - The brush collectors and slip rings of electrical machinery are a pair of parts of sliding contact with sliding friction.
发电机和直流电动机使用的电刷和集电器（环），是电机中唯一的滑动磨擦部件，也是磨损最严重的部分。 - The contact among grains can be classified as perfect contact and sliding contact.
将砂土颗粒的接触方式分为完善联结和滑动联结。 - The crack growth rate was decreased with crack extension because of the sliding contact of the crack faces.
随着裂纹的扩展，裂纹扩展速率由于裂纹面的滑移接触而减小。 - The coefficient of friction and wear of the coating in dry sliding contact with sintered Al2O3 ball were measured using SRV friction and wear tester with ball-on-disc arrangement. The results show that the coefficient of friction and wear of the coating decrease with the increase in temperature.
在SRV高温摩擦磨损试验机上测量了该涂层与Al2O3球对磨从室温到800℃时的摩擦系数和磨损量，结果发现摩擦系数和磨损量都随温度上升而下降。 - It is in this model that the influence of lubricant on stress intensity factors of surface initial fatigue lean crack in rolling/ sliding contact has been analyzed through using the collapsed 8 node quadrilateral isoparametric elements and numerical extrapolated method.
利用该模型，通过使用基于蜕化奇异等参元和数值外插法的K因子计算方法，分析了滚滑动接触工况下摩擦及油压对表面斜裂纹尖端应力强度因子（SIF）的影响。 - Temperature of Hard Disk and Critical Condition for Heat-Induced Demagnetization in Head/ Disk Continuous Sliding Contact
磁头/磁盘滑动接触下磁盘温度及热退磁临界条件的研究 - Finite element analysis of head/ disk continuous sliding contact was performed to investigate temperature field and thermal stress field due to frictional heat using an axisymmetric thermal model. Characteristic temperature rise with sufficient sliding time was exhibited.
采用二维轴对称有限元模型计算磁头/磁盘滑动接触下，铝质磁盘的稳态温度和热应力场以及热退磁临界条件。 - The temperature effect of scuffing in sliding contact of steel is explored from the point of view of frictional temperature.
作者从摩擦温度的观点考察了钢在滑动接触中擦伤的温度效应。擦伤试验是在环-块试验机上进行的。 - Elastic-plastic Deformation Analysis of Multi-layers Surface Coating Under Sliding Contact
多层表面膜在滑动接触时的弹塑性有限元分析 - Calculation of Temperature Field in Dry Sliding Contact at Different Speeds
不同滑动速度下干接触体瞬态温度场计算 - Friction and wear characteristics of electroless Ni-P-PTFE composite coatings against steel and itself under dry, sliding contact were investigated. Wear mechanism of the coatings was discussed on the basis of worn surface morphology and composition of wear products.
测定了Ni－P－PTFE复合镀层的摩擦及磨损性能，结合磨面形貌观测及磨损产物成分分析对其磨损机理作了讨论。 - Improving Sliding Contact of Electric Brush and Choosing the Brush
改善电刷的滑动接触和电刷选择 - Ultra high molecular weight polyethylene ( UHMWPE) and its composites can be used for the sliding contact parts and soil-working components of agricultural engineering equipment since their excellent self-lubrication and anti-adhesion.
超高分子量聚乙烯及其复合材料由于其优良的自润滑和防黏性能可用于农业工程装备中的滑动接触部件和触土部件。 - However, during the process of manufacture there must be some flaws inevitably within the interfaces or coatings, where it is easy to form the critical cracks, make coatings failure and peeled off under the rolling and sliding contact.
而在通常加工过程中，涂层与基体的结合界面、以及涂层本身不可避免地存在缺陷，在滚、滑循环接触载荷作用下容易萌生裂纹，导致涂层失效或与基体剥离。 - There is no frictional error except that of bearing and pivot because it does not use sliding contact.
由于它不是采用滑动式接触，因而除了轴承和轴尖之外没有其他摩擦误差。 - The Three-dimensional Penalty Finite Element Analysis on the sliding contact Rigidity of Vertical Lathes
立式车床滑枕滑座接触刚度的三维罚有限元分析 - Finite element analysis of temperature field of a four-layered disk in sliding contact
滑动接触下多层盘温度场的有限元分析 - This article describes the design principle of the device and its parts, analyses the safe current-carrying capacity, voltage drop, sliding contact and are extinction performances of the device.
文章介绍了装置的设计思想和部件设计原理，对产品的安全载流、电压损失、滑接性能、灭弧性能进行了分析。 - From the point of view of tribology, the interface of different friction essentiality during the brush sliding contact was analyzed, the wear mechanism of graphite brush impregnated silver was also discussed.
并从摩擦学的角度，分析了电刷在集电环上滑动接触时各种摩擦要素的相互作用，探讨了浸银石墨电刷的磨损机理。 - A Study on Sliding Contact of the Ideal Rough Surface
理想粗糙表面的滑动接触问题的研究 - The revised plastic index proposed in the paper will be the helpful foundations to analyze the deformation behaviour of rough surface at sliding contact.
这种影响将随椭圆比的增加而增加，在研究摩擦表面变形特征时必须考虑这一影响。本文提供的修正塑性指数表达式为进行滑动接触时的接触性能分析提供了有力的工具。 - The addition of PEO into POM/ PTFE fiber composites could enhance the formation of transfer film on the mating surfaces during sliding contact, and thus further improved the friction and wear performance.
当PEO加入到POM/PTFE纤维复合材料中时，能够加强对偶面的转移膜的形成，从而进一步改善了材料的摩擦和磨损行为。